When you have successfully completed the installation and opened AutoCAD, the two new ReluxCAD and Relux Interface toolbars will appear on the screen.

Setting Project Defaults

Before you start a new Relux project in AutoCAD, you must set the Project Defaults.

To do this, click the "Project" button. If you are using ReluxCAD for the first time, the dialog window prompting you to register the program will appear.

Enter your personal registration number in the field provided – you will find this number printed on the rear of the CD.

Confirm your entry by clicking on "Register".

The "Project settings" dialog window will now appear:

 

Scaling: enter the number of drawing units per meter in the Scaling field – as specified by the current plan. If you compile your AutoCAD projects in millimeters, for example, then you should enter 1000 units per meter. Check this, if necessary, by conducting a measurement on the plan (AutoCAD command  “distance” ).
The Relux standard symbols will then be automatically scaled to the correct size. You can override the  Scaling  symbol if need be, but this will not generally be necessary.

Create Relux Project File: in the " Create Relux project file"  field, you should allocate a .RDF file to the current drawing.  A new and still empty file can be created by selecting " create".                              .

Note: t he project file is only needed if you wish to exchange data with Relux. If you have not yet defined a project file, you will be automatically taken to this dialog when you execute a corresponding command, such as Draw room.

If the above settings are to be adopted for the symbols, click on the button Update all symbol icons. In the Reference block field, you can enter the path in which the reference block that you have created is located. A reference block makes it possible for you to import lines and text styles into your project.

Further details on this are provided in the article " Luminaire symbols":

>  Luminaire symbols

In order to create a Relux project in AutoCAD, you require a defined room which must be made up of a closed polyline. 

The Relux Interface toolbar offers you the appropriate tool for doing this.

Press " Close"  to exit the project settings.