When you have planned all the rooms that are required, you can:

Compile a table of all the luminaires installed in the CAD plan with the     Parts list  command.

1. Select the  Parts list  command from the ReluxCAD toolbar > The  Configure parts list  dialog window will now appear.

2. Select the text style that you would like to use in the parts list.

3. Enter the desired height for the text on the printout.

4. Specify the plot scale that you have planned for this drawing. The parts list will then automatically be scaled in such a way that its width fits onto an A4 sheet. 

5.. The parts list can thus be readily placed above the planning header.

If you activate the list  only placed luminaires  control box, all the luminaires available in the room concerned will be listed. 

If this control box is deactivated, then luminaires that have been selected but not yet positioned in the room will similarly be included in the list.

Menu display after part list selection.

You can define the column width for the parts list via  Extended .

Extended menu of configure part list

The specified widths/heights are scaled by the program in such a way that, when the plan is plotted on the specified scale, the parts list will be the size of the specified values in millimeters.

It is not possible to change the contents and number of columns at the moment.

Parts list shown into AutoCAD scene