Knowledge DB –
Overview of paid licenses
Get to know and purchase our different licences.
Overview
ReluxDesktop is the main software of Relux Informatik AG, which is free of charge and can also be used for commercial purposes.
In addition, various licences can be purchased to improve working procedures in combination with AutoCAD and Revit or to carry out special lighting designs, e.g. for tunnels.
These add-ons, which are also listed in ReluxDesktop under Licences, are protected by CodeMeter (from Wibu-Systems)
Next step
Install ReluxDesktop from our website and purchase the required licence super fast in our online shop: relux.com/shop
You can find more information about the different products on our website under Softwares.
ReluxThirdParty enables you to compile your complete project using products from third party suppliers, i.e. non-RELUX members inside ReluxDesktop.
ReluxEnergyCH
Compile the Minergie certificate as per the standard to SIA 387/4 (SIA380/4) and obtain your building permit for energy-conscious planning.
There is no need for a ReluxThirdParty in ReluxEnergyCH itself when using products other than those of Relux members.
This add-on can be tested once for 30 days.
ReluxTunnel
Compile tunnel calculations according to the current standards. Using your L20 value, the application will compile and position your luminaires automatically. Switching and dimmer groups permit the corresponding energy assessments.
There is no need for a ReluxThirdParty in ReluxTunnel itself when using products other than those of Relux members.
This add on can be tested once for 30 days against a payment of CHF 500.
Please contact info@relux.com to request this trial.
ReluxObtrusiveLight (kcalc)
The k-value calculator enables the evaluation of glare by obstrusive light by using a dynamic result window.
There is no need for a ReluxThirdParty in ReluxDesktop if the ReluxKCalc licence has been recognised by the use of a command or tool belonging to this licence when using products other than those of the Relux members.
Thanks to the bidirectional interface to the Relux Desktop application, you obtain all the calculation results in the presentation mode you require for your CAD plan.
There is no need for a ReluxThirdParty in ReluxDesktop if the ReluxCAD for AutoCAD licence has been recognised by the use of a command or tool belonging to this licence when using products other than those of the Relux members.
This add-on can be tested once for 30 days and is only available for a full version of AutoCAD, not for the LT version.
ReluxCAD for TinLine Plan
Compile your lighting and sensor plan in TinLine Plan
There is no need for a ReluxThirdParty in ReluxDesktop if the ReluxCAD for TinLine Plan licence has been recognised by the use of a command or tool belonging to this licence when using products other than those of the Relux members.
This add-on can be tested once for 30 days.
ReluxCAD for Revit
Direct access to products from ReluxNet® with over 100 manufacturers of luminaires and sensors. It determines the required number of luminaires for a building efficiently and simply.
There is no need for a ReluxThirdParty in ReluxDesktop if the ReluxCAD for Revit licence has been recognised by the use of a command or tool belonging to this licence when using products other than those of the Relux members.
This add-on can be tested once for 30 days after the ReluxCAD for Revit software has been installed from the website: relux.com/downloads
Licence types & activation
Contact support